Power Products ALPHA C-20/25 Battery Charger Analyzer, 25 Amp

ALPHA C-20/25 (Power Products) Features and Specifications *

Dual-output charger compatible with all types and capacities of Nickel-Cadmium and sealed or vented Lead-Acid aircraft batteries.

The Alpha C-25 Charger is a self-contained unit for charging of rechargeable batteries. It has been designed to charge one or two batteries of the same voltage rating simultaneously, to a combined maximum of 25 amperes. At 40 lbs. and 15 by 5 ¾ inches (381 by 146mm) the C-25 takes minimal space and can easily be moved to add flexibility to the work environment. The charger height and depth are the same as the Power Products’ discharge tester, Beta D-50, with the same general appearance. Therefore, two adjacent units comprise a charger/discharger, which can service from one to three batteries simultaneously, lead-acid or nickel cadmium. 

 The Alpha C-25 allows charging at both constant potential and constant current to give flexibility in selection of charge method. The C-25 charger has an adjustable charge current from 0 to 25 amperes in the CP (Constant Potential) mode. End of voltage settings should be 14.3 for 12 Volt and 28.5 for 24 Volt batteries. Panel trimpots allow user voltage changes if required. In CC (Constant Current) mode, there is no voltage adjustment. Maximum voltage is approximately 37 volts. Two digital panel meters allow viewing of charge current and voltage. They can be switched to allow viewing of either of the two batteries being charged. A digital electronic timer displays elapsed time and can be set to a fixed duration charge period. 

The flexibility of settings of the Alpha C-25 makes it usable for a wide variety of batteries and voltages. The unit efficiently charges Lead Acid batteries of 12 or 24 volts, as well as Nickel Cadmium batteries of a single cell to 24 volts.

The Power Products ALPHA C-20/25 price and features make it a very attractive option compared to similar battery charger analyzers available on the market. 

Features

• Isolated charge - one or two batteries. Charges all 12 and 24 volt Lead Acid batteries and 1-22 cell NiCads.
• Current adjustable from 0 to 25 amps.
• True constant current (Cl) for NiCad batteries or constant potential (CP) for Lead Acid batteries
• Digital ammeter and voltmeter read charge current and voltage for either battery.
• Selectable charge time from 1 to 999 minutes with digital elapsed time.
• Operates on either 115 or 230 VAC.

Specifications

• Charge current: 0-25 amperes total
• AC input: 12A@115V, 6A@230V / 50/60Hz
• DC output cables: 3 sets: Elcon, aligator clips, rings
• Charge voltage/current accuracy: +/- 1%
• NSN: 6130-01-462-6335; 6130-21-258-4429 Canada

BASIC INFORMATION

CHARACTERISTICS

* Power Products ALPHA C-20/25 technical specifications is provided for reference only. Avionteq cannot ensure accuracy of the technical specifications presented herein. The technical data may not relate entirely to all model and versions of the ALPHA C-20/25 such as the models sold by Avionteq.

Buy, sell, trade-in or rent Power Products ALPHA C-20/25 Battery Charger Analyzer.

Avionteq offers both new and refurbished or used Power Products ALPHA C-20/25 25 Amp Battery Charger Alpha 25 for sale or rent at most competitive price. All refurbished equipment are thoroughly tested and come with our warranty and fresh calibration certificate (when required). You can also sell your excess / surplus Power Products ALPHA C-20/25 or receive trade-in credit towards purchase of other test equipment.